Friday, May 21, 2010

Yes, We Have Bamboo Shafts!

Bamboo shafts are back in hand.
My first batch of bamboo shafts kind of sat around for a while. People looked at them, asked a couple questions, and then kept on walking. But when I took them to the Chamberlin Ranch shoot there was a sudden interest in them and every single bamboo shaft I had on hand was sold.
I've got them back on hand now, they're weighed and ready to go.
Suitable for Western archery or Kyuodo, these are Tonkin cane, the shafts are straightened, heat treated, and the nodes are knocked down. These bamboo shafts are almost arrows, needing only your skills as an arrow maker to turn them into accurate, tough, and hard hitting arrows.


As before, the shafts are available in 84cm/33" and 100cm/39" lengths.  They are $3.00 each, plus actual shipping; US orders only. I'm sorry but international shipping is just too expensive and too much of a trial to deal with.
These shafts are unspined but they are weighed. If you have a particular weight you are looking for I'll get as good a group as possible in that weight. If you don't have something particular you're looking for, give me your bow specifics and I'll do my best to get you something applicable.
Included with my shipment was a very limited quantity of 100cm shafts that have been spined by the manufacturer. While spining is not usually necessary for bamboo, he does have them spined for the American market, where we are accustomed to dealing with spined arrow shafts. I only have these spined shafts in 55/60 and they will be available until I run out of them. Each one is stamped just as you see. Price is the same as un-spined bamboo shafts. He didn't charge me extra, I'm not going to charge you extra.


If you've never used bamboo arrows you are in for a treat. Called by some "Nature's carbon arrow shaft" bamboo is tough, fast, and shoots great. Just as with carbon shafts, they shoot well from a wide range of bow weights. Tuning may be accomplished by playing with shaft weight, tip weight, and overall length.

Let me know if you have any questions about what nocks or tips to use, how to make bamboo arrows, or anything else you're not sure about. I'll be glad to help.


Grass, it's the new/old arrow!

Has it really been that long since I last posted?

So, it's been some time since I last posted to the blog.
At least it's been because I've been busy!
Here are a few things I've been working on...

Julian loves archery but lately he's been more involved with photography. I have a feeling that he'll be picking up his bow again when he gets his new arrows this Sunday.


Julian asked for his last name to be written in Chinese character in the cresting. I doubt I'll get any awards for my Chinese penmanship but I think this turned out pretty cool.


He also wanted brass points on these arrows. This is the first time I've used these and they really give a special look to the finished arrow.


Speaking of different points... what do you think of these? They were supplied by a gentleman in Texas for the heavy arrows for his new 80# longbow.


Last year I raffled off a set of arrows on PaleoPlanet to help send a North American member to Bulgaria for a bow and primitive skills gathering over there. Lloyd out in the San Fernando Valley won the arrows and had me make them up for a lady he shoots with at the Woodley Park archery range.
Christine loves her arrows but in the past year Lloyd has seen her borrowing his flu-flus pretty frequently. So he ordered another set in the same design as last year but this set was all flu-flus just for her.


Of the dozen arrows, nine were regular six fletch flu-flu arrows with field points. The other three were six fletch banana fletching and these special whistling heads.This was a fun set to make and I have reports that Christine loves her new arrows.
Edit on 6-12-10, in response to more than one question about the whistling heads, here is a link that will take you to their page in the 3Rivers catalog.


Next up is a set of arrows I'm making for donation to the San Diego Archer's 43rd annual King Arthur's Tournament in Balboa Park. I haven't yet decided what design to make the arrows. The shoot isn't until June 20th so I have a little bit of time for them. Do you have any input on what they should look like?  

Happy archery!

Monday, April 19, 2010

CVA Pacific Coast Traditional Challenge, Simi Valley, CA

The Chamberlin Ranch shoot is fading into our memories (except for Salvador, who is still gloating about winning the clout shoot and getting a new quiver from the quiver raffle) but there is another great trad shoot coming right up:
The Conejo Valley Archers Pacific Coast Traditional Challenge is fast approaching us on May 1-2. This is a great two-day shoot that I look forward to every year. The club does a great job and everyone seems to have a good time. Camping is available at the county park next to the range. A special arrangement with the county gives tent campers a price of $5 per night. Truck campers with no hook up is $10 and RV camping is $37.
We'll be there with the booth selling custom arrows and taking orders for same. I sold out of beef jerky at the Chamberlin shoot but I'm making more as I type this. Other vendors with wonderful wares will also be there, many of them with hand made goods that can be difficult to find elsewhere. I think there will be at least two custom knife makers in attendance.

If you can come out for both days, great! If you can only make it for one day, no problem! Either way, come have fun with us.

Who is with me?!

Chamberlin Shoot Pictures

Photography is wonderful. Aside from the wonderful art that can be created with photography, there is still the documentation of people, places, and events that can be done.
The only problem is, to do it well you pretty much have to dedicate your time to photography. I've tried to take pictures during a shoot or an outing and just end up with a bunch of crappy half-framed snapshots. Sure, the event is documented, you can see that the trees were green and that Sal was using his osage bow, but there's no art, no feeling, and sometimes no focus to the pictures.
Enter the dedicated photographer. This is an individual who has invested the time, the money, and the energy into taking... no, crafting is a better word .... crafting beautiful pictures that show the event and also show the life, the vitality, and the wonder of what we do.
This is kind of a long lead up to Julian Chan's Flickr page for Chamberlin where he has posted some of the many pictures he took during the Chamberlin Ranch shoot. Julian has a bow and loves archery, but that weekend he dedicated himself to the art of photography and I can't thank him enough. I hope you enjoy his efforts as much as I do.

Thanks for reading!

Saturday, April 17, 2010

Newest Work

For awhile I wasn't sure if I'd be able to go to the Chamberlin Ranch shoot. When I found out I could go I began a mad rush to make arrows for sale and to get ready for the shoot.
While some of the following arrows have gone on to new homes, I wanted to put up pictures because there were some really nice arrows put together. Heck, if I can't show off the work I do on my blog, what's the point of having a blog?!

These red and black arrows were one of the most popular sets I had on my table. Everyone loved them. But out of everyone who thought they were great, they were the wrong spine. I did get a couple orders, though: "Make them just like those." Sure, I can do that.
These arrows are spined 40/44 and are already cut to 30" back of point with field points mounted. They're discounted from my regular price; $90.00 for the dozen.


Same type of design, just different colors. These arrows are spined 50/54, cut to 30" BOP with field points mounted, discounted at $90.00 dz.


Something different here. Going with the basic design I did on some bamboo arrows these arrows have small flowers hand painted in the crest area. If you want something really unique, these arrows are for you. I got a lot of comments on these. A couple folks asked where I got the little flower decals. I love to hear that... means I did them good.
These are spined at 30/34, cut to 30" BOP with field points mounted, discounted at $90.00 dz.


This is a special pattern that I love to do. It always turns out very striking and very unique. Have you ever seen purple nocks? 
These are spined at 35/39, cut to 30" BOP with field points mounted, discounted at $90.00 dz.


Similar to the above arrows in style, these arrows have gone on to a new home. I had been holding out to sell them to a virgin but the guy had cash in his hands and I couldn't resist that. If you like these, I can make more.


I tried out something different on these and while they didn't look bad, I wasn't completely happy with the way the crown paint covered. I sold them as cosmetic blems at a very good discount. One thing is almost certain: the archer using these arrows may break them, but he will have a difficult time losing them.


These arrows were commissioned as a wedding present for a wonderful lady. Do you think she likes purple?


Almost forgot these. They've been sold but I can make more if you like them. Same type of pattern as the red/black and the blue/black but in green/black. Did I mention I love this pattern?

                                       

You know, every once in awhile I put together some arrows that look so good I don't want to send them to their new homes. This is one of those sets. This gentleman wanted arrows similar to some I recently sent to New York. I did the cresting slightly different and I think the whole effect is just perfect.




Happy archery!

Monday, March 29, 2010

Chamberlin Ranch Traditional Shoot - April 10-11

The best shoot of the year is coming up fast, the Chamberlin Ranch Traditional Rendezvous is on April 10 - 11.
The shoot is put on by the Traditional Bowhunters of California and specifically by Vince and Cathy Grgas.
There will be three courses to shoot over the weekend as well as novelty shoots, a last man standing shoot, a battle clout and a broadhead challenge shoot.
In addition to traditional archery there will be vendors, flintknapping, atlatls, falconry, raffles, and presentations.
While the shoot officially starts on Saturday a lot of people will be headed in early. I'm hoping to get there on Wednesday myself and I know some who are going Monday. Dry camping is available at the ranch or hotels are nearby in Solvang, Buellton, or Los Olivos.

This is probably one of the best, if not the best, shoot of the year here on the west coast. If you'd like more information about the shoot you can visit the Traditional Bowhunters of California website or email Cathy Grgas at daisiemae2000@hotmail.com before April 3rd.

Hope to see you there!

Wednesday, March 24, 2010

Arrow Shaft Sorting

As we all know (or should know), arrow shafts should be sorted before they turn into arrows.
The more uniform is the ammunition, the more uniform we can expect it to behave on the range or in the field.

Given that we're starting with quality shafts in the first place, we need to group shafts by their spine.
Not spline! I get all twitchy when I hear or see spline. It's spine!
Spine is a measurement of the flexure of the arrow shaft. The arrow flexes as it leaves the bow and an improper amount of flex can give poor results in arrow flight and on the target.
For wood arrows spine is measured by supporting the shaft on 26" centers, hanging a 2lb weight from the center of the shaft, and measuring the deflection.
While shafts used to be ordered by the deflection, today wood shafts are typically grouped into 5lb groups such as #40/44, or #55/59. These numbers are derived by dividing 26 by the deflection. For instance, 26 divided by .500 deflection = 52, usually called a #52 shaft. This number will give us a rough indication of what bow weight it should be used with but there are a myriad other factors to take into account:
Draw length, arrow length, bow type and design, bowstring material, arrow point weight, etc.
Oh, yeah, the shaft also has to be properly oriented on the tester. You can't just throw them on the tool and expect to get consistent and meaningful results.
Choosing the proper wood arrow can get rather complicated and it's not something I'm going to get into here lest I be typing until 6:00am. When you get arrows your arrow maker should ask you a series of questions that will enable him or her to determine the best shaft spine for you and your bow. There's no shame in asking how the decision has been reached and you'll probably learn something interesting about this aspect of archery.

While the shafts I order from the manufacturer are shipped in spine groups I feel I get the best results by going through them on my own and measuring their spine. There are a number of great tools for doing this, both purchased and home made.
I use an Ace Spine Master and have been really happy with it. While its design is a little different, this tool gives the same results as the 26" centers I mentioned earlier. Rather than mount it to a wall as intended I mounted mine to a piece of plywood and then made removable legs so I could take it anywhere. It's very convenient.


Here is a really good slow motion video showing the arrow flexing as it leaves the bow. The video's maker has even put in footage of what happens when using a dangerously underspined arrow. It's well worth watching.

In addition to measuring spine and grouping the shafts accordingly, we want to group our shafts by physical weight.
While some archers may not feel this is important I feel that it is, even for new archers.
Wood is a natural material and as such it can have some pretty wide variation, even in the same tree. Shafts that are the same spine can have wildly varying weights. If we don't match our shafts for physical weight we can easily get into a situation where our arrows have quite a bit of weight difference from one another. That is not generally good for accuracy.
Arrow weights are expressed by grains; there are 7000 grains in a pound. There have been a number of good inexpensive grain scales introduced to the market in recent years but I use one I got back when I reloaded all my firearm ammunition: a Dillon D-Terminator (the design has changed a little over the years since I got mine). While not the cheapest scale out there (although it was the best when I purchased it, and still is the best), Dillon is a great company and really stands behind their products.
Most arrow makers or shaft sellers who sort their shafts for weight go for +/- 10 grains. This means there could be a 20 grain variance from your heaviest to lightest shafts in a dozen. Believe me, 20 grains isn't very much so this standard works pretty well.


Here's the results of a day's worth of measuring shafts on the spine tool and the scale.


Now all I have to do is sort them by weight.

I'm going to bed.